Posted in

how to remove pilling from knitted fabric

Hey everyone, let’s talk about something that’s been bugging knitwear lovers and even folks in the business for years – pilling on knitted fabric. If you’re here, you’ve probably pulled a soft sweater off the hanger, only to notice tiny fuzzy balls stuck all over it, or maybe you’re a buyer who’s dealt with pilling complaints from clients. As someone who’s been in the knitted fabric game for over a decade, I get it – pilling doesn’t just ruin a piece’s look; it can turn a repeat customer into someone who looks elsewhere fast. Knitted Fabric

First off, let’s cut to the science: what even is a pill? It’s not some random flaw in the fabric (though bad manufacturing can make it worse). Pills form when tiny loose fibers from the knit’s surface get trapped between the yarns, then rub together from wear and tear (think arms rubbing a jacket sleeve, a skirt catching on a chair). Over time, those fibers twist into little balls, and since knits are inherently stretchy and have lots of surface fibers, they’re way more prone to pilling than, say, a woven cotton sheet.

Here’s the thing I’ve learned from working with hundreds of factories and clients: most pilling issues aren’t about “bad fabric” – they’re about how you care for it, or even how the fabric is constructed. For example, our company uses ring-spun yarns for most mid-weight knits, which have longer fibers that are less likely to loosen and pill. But if a client uses a too-hot dryer, or washes a cashmere blend on a high spin cycle, those long fibers start to fray, and boom – pills. That’s why we always include care tips with every bulk order we ship; it’s saved so many folks from headaches later.

Now, if you already have pills on your fabric, don’t panic – you don’t have to toss it (or write off your order). I’ve tested a ton of methods over the years, and some work way better than others. Let’s break down the ones that are actually safe, and the ones that’ll just make it worse.

First up, the DIY method that’s super popular, but most people do it wrong: the razor trick. Wait, not a utility knife – we’re talking a clean, single-edge safety razor or a fabric shaver specifically made for knits. Here’s my pro tip: lay the fabric flat on a hard, smooth surface (a cutting board or ironing board works), stretch it slightly taut so the surface is even. Then, hold the razor at a 30-degree angle, not flat against the fabric – if you press straight down, you’ll snip the actual knit threads and create holes. Glide slowly over the pills, light pressure only. I do this in small sections because rushing leads to mistakes. For thicker knits like wool sweaters, this is perfect, but for delicate stuff like silk knits or fine gauge (15+ stitches per inch) cotton, stick to a fabric shaver instead – razors can snag there.

Speaking of fabric shavers, not all are equal. Cheap drugstore ones can pull the fabric, especially if they have dull blades. The good ones have fine, rounded blades that snip pills without grabbing fibers. We even keep a few high-quality ones in our warehouse for testing samples, so if a client gets a bulk order and notices pills early on, we tell them to grab one of these before they go nuts.

Another method people swear by: the lint roller. Wait, but not the flimsy paper ones – the thick, adhesive ones made for upholstery? Yeah, those work, but only for surface pills. If the pills are embedded deep, a lint roller won’t get ’em. I use this for quick touch-ups on clothes I’m wearing out, but it’s not a long-term fix. Also, don’t overdo it with the adhesive – you’ll start pulling the fabric’s surface fibers, which leads to more pilling later.

What about washing methods? Can you prevent pilling in the first place, not just remove it? Absolutely. First, turn your knit inside out before washing. That keeps the surface fibers from rubbing against other clothes or the drum, which is a huge cause of pilling. Use a gentle cycle and cold water – hot water makes fibers shrink and fray, which leads to more pills. Skip the fabric softener, too – it coats the fibers and makes them more likely to break loose. If you’re washing in a machine, use a laundry bag (the mesh kind, not the cotton ones) to keep knits from tangling. Tangling equals rubbing, equals pills.

For our bulk clients, we always recommend recommending that their customers hang knits to dry instead of using a dryer. Even air drying on a rack is gentler than tumbling. If you must use a dryer, use the lowest heat setting and take the fabric out as soon as it’s dry – leaving it in the dryer for extra time adds more friction.

Wait, what about when pilling is really bad – like, it’s covering half the fabric, and the pills are tiny and tangled? I’ve found that a mild fabric brush (the kind with soft, natural bristles, not the plastic ones) works well here. Gently brush against the grain to loosen pills, then use a razor or shaver to pick ’em up. Don’t brush too hard, though – again, you don’t want to damage the knit’s structure.

Now, let’s talk about the mistakes I see all the time, especially from new brands or small retailers. One big one: using a sweater stone on knits that aren’t meant for it. Sweater stones are great for wool, but for cotton or polyester blends, they can be too harsh and leave little fuzz behind that turns into pills later. Another mistake: washing knits with rough fabrics like denim or towels. Denim has those tough fibers that rub against knits and cause tons of pilling. We always remind our clients to separate their knits from rough items in the wash, and it’s cut pilling complaints by like 40% for us over the past year.

If you’re a small business owner who buys knitted fabric in bulk, you might be wondering: should I test for pilling before placing a big order? Yes, absolutely. We do a “rub test” on every sample we send out – we rub two pieces of the knit together for 10 minutes, then check for loose fibers and pills. That’s a quick way to gauge how the fabric will hold up to wear. If a client’s market is, say, activewear (where fabric gets a lot of friction), we recommend a tighter gauge knit and a yarn that’s more twist-plied, which reduces pilling. For casual loungewear, a slightly looser knit is fine as long as it’s made with ring-spun yarns.

Another thing: pill-resistant finishes. Some fabrics have a chemical finish that reduces pilling, but we avoid those because they can wear off over time, and some people are sensitive to the chemicals. Instead, we focus on yarn quality and knit construction – that’s the long-term fix, not a quick coating. Our customers tell us that their items hold up way better because of that focus, which translates to fewer returns and happier buyers.

Let’s wrap this up with some quick, actionable tips you can use today:

  1. For existing pills: Use a clean safety razor or high-quality fabric shaver, hold at 30 degrees, light pressure, stretch fabric taut.
  2. Prevent pilling: Turn knits inside out, cold water gentle cycle, mesh laundry bag, hang to dry, skip fabric softener, separate from rough fabrics.
  3. For bulk buyers: Ask for a rub test on samples, prioritize ring-spun yarns for high-wear items, avoid over-tightening spins too much (that can cause yarn breakage).

If you’ve tried any of these methods and they worked, or if you’ve got a pilling trick that I missed, drop it in the comments below. And if you’re a brand or retailer in need of reliable, pill-resistant knitted fabric for your next line, we’ve got a huge range of cotton, wool, polyester, and blend knits, all tested for wear. Hit us up to chat through your needs and get a sample pack.

Stretch Fabric References
Textile Institute. (2020). Pilling in Knitted Fabrics: Causes and Prevention. Journal of Textile Science and Fashion Technology.
The Woolmark Company. (2021). Care Guidelines for Knitwear to Reduce Pilling.
International Organization for Standardization. (2019). Test Method for Pilling Resistance of Textile Fabrics. ISO 12945-2:2019.


Shaoxing Xinlian Dyeing & Weaving Industry Trade Co., Ltd.
We’re well-known as one of the leading knitted fabric manufacturers and suppliers in China. With a professional production team, we are able to meet the needs of the majority of our customers. Please rest assured to wholesale bulk customized knitted fabric from our factory.
Address: Building 3-2, Huangxian Village, Lanting Subdistrict, Keqiao District, Shaoxing City, Zhejiang Province, China
E-mail: inquiryxinlian@163.com
WebSite: https://www.xinliantextile.com/