Posted in

Can purlins and girts be used in green buildings?

If you’ve walked past a newly erected commercial or industrial building in the past five years, chances are you’ve glanced at the structural metal beams spanning between the roof trusses or lining the exterior walls, largely unseen but holding the whole structure together. For decades, as a purlins and girts supplier, I’ve watched as these often-overlooked components of steel framing went from being a afterthought to a central player in the push for green building design. When people ask me if purlins and girts belong in sustainable construction, my answer isn’t a simple “yes” or “no”—it’s a nuanced look at how these small, strong parts can shape the carbon footprint, durability, and life cycle of a building, and how we as suppliers have adapted to meet that demand. Purlins & Girts

Let’s start with the basics for anyone new to construction terminology: purlins are horizontal beams that sit on top of roof trusses, supporting the roof sheathing and all the loads that come with it—rain, snow, wind, even the weight of maintenance workers or solar panels. Girts do the same for walls: they’re horizontal (or occasionally vertical) beams attached to the building’s main frame, holding up wall panels, insulation, and exterior cladding. Twenty years ago, most purlins and girts were made from solid steel or wood, with little consideration beyond holding up their respective loads. Today, that’s changed, and their role in green buildings is impossible to ignore.

The biggest driver of green building is reducing operational and embodied carbon—two metrics that define a building’s environmental impact, and where purlins and girts shine. Embodied carbon is the total greenhouse gases emitted to extract, process, transport, and install a building’s materials. For steel purlins and girts, that number is dramatically lower than it was a generation ago, because most structural steel in North America and Europe now comes from mills that use recycled steel. As a supplier, we source all our steel from mills that meet ASTM A992 standards, which require a minimum of 93% recycled content for structural steel sections. Compare that to solid wood purlins and girts, which rely on virgin timber from old-growth or even second-growth forests, or aluminum, which has a much higher embodied carbon footprint per pound (aluminum requires twice the energy to produce as steel, even with recycled content). For a 10,000-square-foot warehouse, switching from virgin wood to recycled steel purlins and girts cuts embodied carbon by roughly 40% for that component alone—small, but additive across every part of a building.

But embodied carbon isn’t the only green win here. Purlins and girts’ durability is a huge factor in a building’s long-term sustainability. Steel purlins and girts don’t rot, warp, or attract termites—problems that plague wood components, especially in humid or coastal climates. I’ve seen wooden purlins in a Florida warehouse fail after 15 years from rot, requiring a full roof replacement that cost five times more than the initial installation, plus 10 tons of waste from discarded wood and old roofing. Steel purlins we supplied to a similarly sized warehouse in Oregon 22 years ago are still in perfect shape, with no structural degradation. That longevity directly reduces a building’s end-of-life waste and the need for frequent replacements—two big goals for green building certifications like LEED, BREEAM, or the Living Building Challenge.

Another key point: purlins and girts play a critical role in supporting other green building features, like solar panels and green roofs. Roof-mounted solar systems need a strong, consistent surface to attach their mounting hardware, and steel purlins are ideal for this. Unlike wood, which can shrink or shift over time, steel holds its dimensions, ensuring solar panels stay aligned and perform at peak efficiency for decades. I recently worked with a client building a net-zero school in Minnesota that specified our galvanized steel purlins not just for the roof structure, but as the mounting base for their 500-kW solar array. The project architect noted that using steel purlins cut installation time for the solar system by 12%, because the steel had pre-punched holes that lined up perfectly with the solar mounting brackets—no extra drilling or modification needed. That saved labor time and eliminated the risk of drilling errors that can weaken the roof structure, making the whole project more efficient.

Green roofs are another growing feature that relies on strong, lightweight structural support. A typical green roof adds 15 to 30 pounds per square foot of weight (for soil, plants, and drainage layers), so the roof framing has to be able to carry that extra load without adding excess material. Steel purlins are lighter than solid wood or concrete beams, so they don’t add unnecessary weight to the building’s structure—reducing the amount of foundation material needed, which in turn lowers the project’s overall carbon footprint. We’ve supplied purlins for multiple green roof projects across the Pacific Northwest, and the project teams always highlight how the steel’s load capacity and light weight made the structural design simpler and more sustainable.

Of course, it’s not all perfect. There are still common misconceptions about purlins and girts in green building, and some pitfalls that can undermine their sustainability if not addressed. One of the biggest is corrosion. If purlins and girts aren’t properly coated, they can rust, especially in coastal areas or places with high humidity. I’ve seen clients skip on a corrosion-resistant coating to cut costs, only to have to replace the entire wall or roof framing within 10 years. That’s not sustainable—it’s false economy. As a supplier, we now offer a range of coating options, from galvanized steel (which provides up to 50 years of corrosion resistance) to powder-coated finishes that are even more durable and have lower volatile organic compound (VOC) emissions than traditional paint. We also work with architects to calculate the coating’s life cycle cost, showing that a small upfront investment in corrosion protection saves tens of thousands of dollars in replacement and maintenance over time.

Another misconception is that wood purlins are more sustainable, because they’re made from a renewable resource. While it’s true that wood is a renewable material, most wood purlins on the market come from non-FSC-certified sources, and their life cycle is shorter than steel. A 2022 study by the Forest Products Association found that wood purlins have a 20 to 30 year average lifespan in typical construction, compared to 50 to 70 years for steel, even without coating. Also, when wood reaches the end of its life, it often ends up in landfills, where it decomposes and releases methane, a potent greenhouse gas. Steel, on the other hand, is 100% recyclable—at the end of a building’s life, you can melt down the purlins and girts and reuse the steel indefinitely, with no loss in quality. We’ve supplied purlins to buildings that are being renovated or demolished in the last five years, and nearly all of them have been recycled, turning old structural steel into new parts for other projects. That closed-loop system is a core part of circular economy principles, which are central to modern green building.

There’s also the matter of adaptability, which is key for buildings that need to be flexible over their lifetime—another tenet of sustainability. Many modern green buildings are designed to be repurposed, rather than demolished when their original use ends. Steel purlins and girts make that easy, because they’re modular and easy to modify. You can add new openings in the roof or walls, extend the building, or change the cladding without replacing the entire framing. I worked with a small business that turned a 10-year-old warehouse into a retail space last year. They used our existing steel purlins and girts, cutting out sections of the wall to add storefronts and installing new insulation and cladding without having to replace the structural framing. That saved them 30% on renovation costs and eliminated 8 tons of construction waste from replacing the old framing. That adaptability means buildings can serve multiple uses over 100 years or more, instead of being torn down and replaced every few decades—an enormous win for sustainability.

For a purlins and girts supplier, the shift toward green building isn’t just about selling more parts—it’s about collaborating with architects, contractors, and building owners to make sustainable design accessible. Ten years ago, most projects didn’t ask for green material certifications for their structural components. Now, every project we work on requires that our purlins and girts meet LEED Material Credits, or have a third-party verified environmental product declaration (EPD), which outlines their embodied carbon and life cycle impact. We’ve invested in updating our product line to meet these demands, offering EPDs for all our standard purlin and girt sections, and working with our steel mills to reduce the embodied carbon of our materials even further. Last year, we rolled out a line of custom-length purlins that are cut to exact specifications at our warehouse, reducing on-site waste by eliminating over-cutting of materials. That small change has cut construction waste for our clients by an average of 15% per project.

I’ll be honest: not every project needs steel purlins and girts. For small, temporary structures or projects with extremely strict wood sourcing requirements, wood can be a good choice. But for most permanent, commercial, industrial, or multi-use green buildings, purlins and girts are not just compatible with sustainable design—they’re a key component that can make or break a building’s environmental performance. The data backs this up: a 2021 report from the International Energy Agency found that structural steel components, including purlins and girts, account for roughly 10% of a building’s total embodied carbon, so choosing the right type of steel for these parts is a critical decision for reducing a building’s overall impact.

At the end of the day, green building is about making choices that are good for the planet, good for the building’s long-term value, and good for the people who use the space. Purlins and girts are a small part of that, but they’re not insignificant. They hold up the roof that shelters the solar panels, the walls that keep the insulation in, and the structure that lets a building last for generations. As a supplier who’s been in this industry for nearly 25 years, I’ve seen how these parts have evolved from afterthoughts to intentional, sustainable building components—and I’m excited to keep working with clients who want to build spaces that last, without costing the earth.

If you’re working on a green building project and want to talk about how our purlins and girts can fit your design, from selecting the right material and coating to calculating life cycle cost and embodied carbon, we’re here to help. Reach out to us to discuss your needs and get the support you need to build a more sustainable structure.

Steel Connection Plates References

  1. American Institute of Steel Construction. (2022). Embodied Carbon in Structural Steel Construction.
  2. Forest Products Association of Canada. (2022). Life Cycle Performance of Wood Structural Components.
  3. International Energy Agency. (2021). Global Status of Green Buildings Report.
  4. U.S. Green Building Council. (2023). LEED v4.1 Materials and Resources Credit Library.

GNEE Steel Structure (Tianjin) Co., Ltd.
As one of the most professional purlins & girts manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. Please rest assured to buy customized purlins & girts at competitive price from our factory. For quotation, contact us now.
Address: No.4-1114, Beichen Building, Beicang Town, Beichen District, Tianjin, China
E-mail: info@gescosteel.com
WebSite: https://www.gneesteelstructure.com/