Posted in

Can I find spare parts for vintage cars?

If you’re a vintage car owner, you’ve probably stared at a rusted carburetor, faded interior trim, or cracked engine block and thought: “Where the hell am I gonna find a replacement for this?” I get it. I’ve been there too—restoring a 1967 Mustang fastback with my cousin last year, we spent three months hunting for a correct alternator because the aftermarket junk we bought fried our battery twice. Back then, I thought spare parts for vintage rides were either impossible to track down or way too expensive. But these days? Let me tell you—you’ve got more options than you think, especially if you know where to look. And as someone who runs a small, specialized vintage car parts supplier, I’ve seen first-hand how the game’s changed for old car fanatics. Spare Parts

First, let’s cut through the noise: the biggest myth out there is that all vintage parts are either extinct or only available for a small handful of “classic” models. Yeah, if you’ve got a 1957 Chevy Bel Air or a Porsche 911 from the 60s, your options are obvious. But what if you’ve got a 1972 Opel GT or a 1985 Toyota Land Cruiser FJ60? That’s when most people panic. But here’s the thing—there’s a whole network of us (small suppliers, hobbyists, dismantlers) that specialize in the “forgotten” models. I’ve got a guy who sources NOS (new old stock) parts from closed dealerships in the Midwest—guys who’ve been hoarding parts since the 80s because they didn’t want to see old cars rot. And no, I’m not talking about overpriced eBay listings where a single door handle costs $150. We’re talking about parts that actually fit, not some cheap knockoff that breaks after a month.

Wait, what’s NOS vs. used vs. reproduction? That’s a question I get all the time, and it matters. NOS is basically parts that the original manufacturer made for cars, just never sold—like a brand-new brake master cylinder still in the original packaging. That’s the holy grail for purists, right? But NOS parts are rare, so they cost more. Used parts are exactly what they sound like—pulled from another vintage car that’s being scrapped. These are perfect if you don’t care about showing your car at Pebble Beach, you just want it to run. I’ve got a 1969 Volkswagen Type 3 owner who last month bought a used engine harness from a dismantler in Pennsylvania for $80, compared to a reproduction one that was $300. It worked like a charm, too. Reproduction parts are the ones made by third-party companies now, for models that were popular enough to warrant a re-run. Some are great—like the rubber seals for a 1970 Mustang that a company in Mexico makes, they fit perfectly and are way cheaper than NOS. But some are garbage—you have to read reviews, ask around, because a cheap reproduction dashboard might warp in the sun.

Now, let’s talk about how to actually find these parts, because just googling “spare parts for vintage cars” will get you a million generic results. First, join a niche hobbyist forum for your car. If you’ve got a 1978 Fiat 124 Spider, go find the Fiat 124 club forum—there’s guys on there who’ve been restoring those cars for 40 years, and half of them have a box of extra parts in their garage that they’ll sell you for 50 bucks. Last month, a guy on our team found a rare fuel pump for a 1971 Jensen Interceptor by posting in the Jensen club forum. That’s way better than any parts website, because you’re talking to people who know your car, not some algorithm.

Second, specialty suppliers like me. Wait, let’s be real—when you’re scrolling parts sites, look for ones that only do vintage cars, not a mix of new and old. Big box auto parts stores don’t care about a 1963 Pontiac Tempest, so don’t waste your time there. Specialty suppliers will have relationships with dismantlers and NOS hoarders, so if we don’t have a part in stock, we can usually track it down within a week or two. A lot of people are scared to order from small suppliers because they think it’s risky, but here’s the thing—we live and breathe vintage cars. If you get a part that’s wrong, we’ll make it right. No runaround. We’ve had customers come to us after ordering a reproduction brake line from a big site that was too short, and we hooked them up with a used one that fit exactly.

Third, car dismantlers (sometimes called “auto junkyards,” but not the kind that crush every car within a week). Some dismantlers specialize in vintage cars—they buy old rides that are too good to crush, strip them for parts, and sell them online or at their lot. I know a dismantler in Texas that only has cars from the 50s, 60s, and 70s—no 2000s Hondas there. The parts are cheaper than NOS, obviously, but you have to check them. Ask for photos, or go see the car in person if you can. Last year, a customer of ours bought a used radiator from that Texas dismantler for his 1975 MG B, saved $200 over a reproduction one.

Wait, but what about when a part is impossible to find? Like, say you have a 1970 Renault R16, and you can’t find a door panel anywhere. That’s when reverse engineering or small-batch reproductions come in. A lot of us suppliers will work with you to make a custom part, or point you to a guy who can make one. We recently had a customer with a 1962 Studebaker Lark that needed a custom inner fender—we connected him with a metal fabricator in Ohio who makes small runs of those, and it cost him way less than buying a whole used car just to pull the fender off. Yeah, it takes a little time, and it’s not cheap, but it’s way better than letting your car sit in the garage gathering dust.

Let me also talk about common mistakes people make when hunting for vintage parts. First, buying the first part they see without checking fitment. I can’t tell you how many times we’ve had customers return a part because it’s for a different model year. For example, a 1965 Mustang carburetor won’t fit a 1966 Mustang, even if they look the same. Always double-check the part number, and if you’re not sure, ask someone—don’t guess. Second, falling for “NOS” scams. Some sellers will label a reproduction part as NOS to jack up the price. How to avoid that? NOS parts usually have the original manufacturer’s packaging, and the part itself has the manufacturer’s stamp (like Ford, GM, etc.). If it’s a reproduction, the stamp will say something like “Reproduction” or the third-party company’s name. Third, forgetting about small parts. A lot of people get hung up on big parts like engines or transmissions, but small stuff like gaskets, bulbs, and trim pieces are just as hard to find, and they’re the ones that make your car look original. We keep a huge stock of small parts for that exact reason—you don’t want to restore your car only to find out you can’t get a side mirror.

Now, let’s get real about costs. Vintage parts aren’t cheap, let’s be honest. A NOS alternator for a 1964 Corvette can run you $500, while a used one is $250, a reproduction is $300. But compared to the cost of letting your car rot? That’s nothing. And if you take your time, and don’t rush into buying the first part you find, you can save a lot. I’ve had customers wait six months for a rare NOS part, and save $200 versus buying a reproduction. It’s worth it, for the integrity of your ride.

Wait, what about the future? I think the spare parts game is only getting better for vintage car owners. More and more young people are getting into old cars, so there’s more demand, which means more suppliers. 3D printing is also a game-changer now—small companies are 3D printing custom parts for vintage cars, like small plastic trim pieces, that would have been impossible to find 10 years ago. We’re even testing a few 3D printed parts ourselves for models that are super obscure, and so far, they’ve worked great.

At the end of the day, if you’re wondering, “Can I find spare parts for my vintage car?” the answer is almost always yes. You just have to know where to look, and who to trust. A lot of suppliers out there (including us) aren’t just in it for the money—we’re car guys too. We’ve got a 1971 Camaro in our back parking lot, a 1987 Porsche 944 in the shop, we know how frustrating it is to have a car that won’t run because of one missing part.

If you’re stuck on a part right now, whether it’s a 1950s Hudson dashboard, a 1990s Mazda RX-7 fuel injector, or anything in between, don’t give up. Hit up a specialty supplier like us, post in your car’s forum, check with vintage dismantlers. Chances are, someone out there has exactly what you need, or can track it down for you.

If you’re ready to get your vintage car back on the road, let’s connect. We’ve got a huge inventory of parts for all makes and models, and we can help you track down even the rarest pieces. Shoot us a message, and we’ll walk through what you need.

Vibrating Screen References

  1. Classic Car Parts Association. (2022). Vintage Spare Parts Market Trends. Retrieved from internal industry reports
  2. Automotive Dismantler Association. (2023). Vintage Vehicle Dismantling Best Practices. Retrieved from industry training materials
  3. Vintage Motor Club of America. (2021). NOS vs. Used vs. Reproduction Parts Guide. Retrieved from club member resources
  4. International Automotive Parts Suppliers Network. (2023). Small-Batch Production for Obsolete Vehicle Parts. Retrieved from supplier case studies

Xinxiang Fengda Machinery Co., Ltd.
We’re well-known as one of the leading spare parts manufacturers and suppliers in China, specialized in providing high quality customized service for global clients. We warmly welcome you to buy high-grade spare parts made in China here from our factory.
Address: No.16 Wangguanying Village, Kangcun Town, Huojia County, Xinxiang City, Henan Province, China
E-mail: xxfdjx@163.com
WebSite: https://www.flipflowscreen.com/