Posted in

what is the use of encoder in plc

If you’ve ever walked into a factory at 2 a.m. and seen a robot arm perfectly stack boxes, or a conveyor belt moving parts with millisecond accuracy to a packaging machine, you’ve witnessed a tiny, unassuming component doing most of the heavy lifting: the encoder. As someone who’s spent the last decade supplying encoders to manufacturing floors, I’ve lost count of how many times I’ve heard plant managers say, “We just need the PLC to tell the motor what to do.” But the encoder is the middleman that makes that “do” actually make sense—no guesswork, no waste, no downtime. Let’s break down what encoders actually do in a PLC system, why they’re non-negotiable, and why skimping on them is a short-sighted mistake. Encoder

First, let’s level-set what a PLC even is, for anyone who’s new to the space. PLC stands for Programmable Logic Controller, right? It’s the industrial workhorse that runs everything from assembly lines to packaging machines to automated warehouse sorters. It’s the brain that sends commands: “Move the conveyor 10 feet,” “Turn the drill 500 RPM,” “Stop when you see a red part.” But here’s the thing: the PLC is terrible at knowing if those commands actually happened. If a motor’s belt slips, or a gear wears down, or a power glitch makes it skip a rotation, the PLC has no clue. That’s where the encoder comes in—it’s the eyes and ears of the PLC, translating physical movement into data the brain can understand.

Encoders are basically motion measurement devices. They come in two main types, which I explain to clients all the time: incremental and absolute. Incremental encoders spit out pulses every time the shaft turns a tiny fraction of a degree. The PLC counts those pulses, multiplies by a preset ratio (like “1 pulse = 0.1 inches of conveyor movement”), and tracks position or speed. Absolute encoders, though, give the PLC a unique code every time the shaft is in a position—so if power cuts out, when it comes back, the PLC doesn’t have to “re-home” (reset position from zero) which is a huge win for processes that can’t afford to pause. I’ve seen plants save hours of downtime a month just by switching from incremental to absolute encoders for their heavy lift systems.

Now, let’s get to the meat: what use do these encoders serve specifically in a PLC setup? Let’s walk through real scenarios, because theory doesn’t matter when a machine is down.

First, closed-loop control. This is the biggest one, and the reason encoders are not optional. If you’ve ever had a motor run too fast, too slow, or veer off course, that’s open-loop control—just the PLC sending a command, no feedback. Closed-loop control means the encoder sends real-time data back to the PLC, which adjusts the motor instantly to fix mistakes. For example, take a robotic arm on a car assembly line. The PLC tells the arm to rotate 90 degrees to bolt a door. Without an encoder, the motor might rotate 88 degrees because of friction, and the door is misaligned—wasting parts, slowing production, or even causing safety hazards. Add an encoder: the arm’s shaft rotation is measured 100 times a second. If it only turns 87 degrees, the PLC kicks in a tiny boost of power to spin it another 3 degrees, locking exactly where it needs to be. I had a client a couple years back who was wasting 20 steel door panels a week because their old open-loop system was off. They swapped in our incremental encoders, cut that waste to less than one panel a month. That’s a $10k-a-month savings just from a $500 encoder upgrade.

Next, speed control. A lot of people think encoders are only for position, but they’re just as critical for keeping machines moving at the right pace. Think about a packaging line that bottles soda. The conveyor has to move at the exact same speed as the filler nozzle—if the conveyor is a hair too fast, the bottle doesn’t line up under the nozzle and you spill soda; too slow, the line backs up and you have to shut down. The encoder on the conveyor shaft sends the PLC a pulse every rotation. The PLC calculates speed in milliseconds, compares it to the target, and adjusts the motor’s voltage or frequency on the fly. If the conveyor slows down by 5%, the PLC increases power; if it speeds up, it dials it back. No encoder here, and the line would be janky, inconsistent, and way more prone to jams. I’ve had clients with snack packaging lines tell me their uptime jumped 15% after adding encoders to their conveyor systems—no more stopping to re-align bottles.

Then there’s positioning accuracy for high-precision tasks. Some jobs need to be dead-on: printing barcodes on medication vials, cutting fabric for clothing, or aligning solar panels on a production line. These processes often need positional accuracy to within a thousandth of an inch, which a PLC alone can’t deliver. The encoder’s resolution (how many pulses per rotation, or how unique a position code) makes that possible. For example, an encoder with 10,000 pulses per revolution translates to 0.036 degrees per pulse—small enough that the PLC can adjust the machine’s motion to that tiny increment. I worked with a medical device manufacturer last year that needed to implant tiny sensors into pacemaker casings. Their old encoder only had 2,000 pulses, so the position was off by 0.2 degrees, and 1 in 10 sensors were damaged during insertion. Swapping to a 16,000-pulse absolute encoder fixed that—damage rate dropped to 1 in 1,000, saving them $500k a year in scrapped parts.

Wait, but what about when things go wrong? Encoders are also PLC’s early warning system for failures. If an encoder stops sending pulses, or sends a weird number, the PLC doesn’t just run blind—it triggers an alarm. That means maintenance teams get a notification before the machine breaks, instead of finding out when the line is already down. I had a food processing client last year whose encoder flagged a worn gear on a mixing tank. The maintenance team replaced the gear during a scheduled break, instead of a 4-hour unplanned shutdown that would have cost them $20k in lost production. That’s another use: predictive maintenance, which is huge right now as factories move away from reactive repairs.

Now, let’s clear up a common misconception: some small machines (like a simple conveyor that only moves to two fixed points) don’t need encoders, right? Maybe, but even then, it’s often worth it. The cost of an encoder is tiny compared to the cost of downtime or scrap parts. For example, a 2-inch conveyor for a small workshop might run fine without one, but if it moves 1/4 inch too far and drops a $100 custom part, that’s way more than the $75 encoder. For mid to large industrial machines, encoders are non-negotiable. They’re not a luxury add-on—they’re the component that turns a “run until it breaks” PLC into a reliable, efficient system.

As an encoder supplier, I talk to a lot of engineers who cut corners on encoders to save a few bucks, and I’ll be the first to say: that’s a false economy. Cheap encoders might work for a month, but they’re prone to signal noise, drift, or failure in harsh factory environments (like high heat, dust, or vibration). A good industrial encoder is built to hold up to that—IP65-rated, sealed against dust and moisture, with a rugged housing that won’t break from a little bump against a metal part. I’ve seen clients swap a $10 cheap encoder every 3 months, only to spend more than they would have on a $150 high-quality one that lasts 5 years. It’s a no-brainer, really.

Another point: synchronization of multiple machines. A lot of production lines have moving parts that have to work in perfect sync—like a rotary cutter and a feed roller for a paper mill, or a robot and a conveyor in a distribution center. If one is off by even a fraction of a second, the whole line jams. Each of those parts has an encoder feeding data back to the PLC, which coordinates all their movements in real time. Without encoders, you’d have to use mechanical gears or belts to sync them, which is inflexible—change the line, and you have to swap parts. With encoders, you just adjust the PLC’s code, which is way faster and cheaper. That’s a big win for factories that do frequent product changes, which is most consumer goods plants these days.

Let me wrap this up with a real example that hits home. Last year, a client in the automotive industry called me in a panic. Their assembly line for electric vehicle batteries had gone down at 1 a.m., and no one could figure out why. When we got there, the PLC was showing a “position error” message, but without an encoder, they had no way to tell if the error was in the motor, the gearbox, or the PLC itself. We hooked up a replacement encoder, and immediately saw that the original encoder had a faulty signal line—one tiny frayed wire was sending inconsistent pulses to the PLC. Replacing that encoder fixed the line in 20 minutes, instead of the 4 hours they would have spent tearing apart the motor to find the issue. That’s the power of an encoder in action: it’s not just a measurement tool, it’s a diagnostic tool too.

At the end of the day, the encoder’s core use in a PLC system is to close the loop between the controller’s commands and the actual physical motion of the machine. It turns abstract “move here” orders into concrete, verifiable actions. It reduces waste, cuts downtime, improves accuracy, and makes machines smarter. If you’re running a factory, investing in good encoders isn’t just a part purchase—it’s an investment in your line’s efficiency and reliability.

If you’re struggling with inconsistent motion, unplanned downtime, or inaccurate positioning in your PLC systems, let’s connect to talk through your needs and find the right encoder solution for your setup. We offer a range of incremental and absolute encoders built for industrial environments, with fast delivery and technical support to make sure they work seamlessly with your PLC.

Push Button ON OFF Switch References

  1. Bolton, W. (2015). Programmable Logic Controllers and Industrial Automation. Newnes.
  2. Kasabov, N. (2002). Intelligent Control of Robotic Systems. Springer.
  3. Industrial Automation Association. (2021). Motion Control Best Practices for PLC Systems. International Society of Automation.
  4. encoder suppliers (industry standards), (2020). Rugged Encoder Design for Harsh Industrial Environments. Industrial Electronics Magazine.

Dongguan City Kalhua Electronlcs Co., Ltd.
Dongguan City Kalhua Electronlcs Co., Ltd. is one of the most professional encoder manufacturers and suppliers in China. Feel free to buy high quality encoder from our factory. For further details, welcome to contact us.
Address: No.1 Lindong 2 Road, Lincun, Tangxia Town, Dongguan, Guangdong, China
E-mail: sales-d@kailh.com
WebSite: https://www.kailhswitch.com/