Posted in

Can coiled pipes be used for oil and gas pipelines?

If you’ve ever driven past an oil and gas field at dusk, you’ve probably seen rows of heavy, rigid steel pipes lined up along well pads, their girth so wide they look like they could double as bridge supports. For decades, that’s been the default image of midstream oil and gas infrastructure—sturdy, permanent, inflexible. But as a coiled pipe supplier who’s spent the last 12 years working with operators across North America, the Middle East, and Southeast Asia, I’m here to tell you that those coiled steel spools parked right next to those rigid pipe runs aren’t just a side project or a temporary fix. They’re a legitimate, game-changing alternative that’s stopped operators from pulling hair over delays, cost overruns, and maintenance headaches. Let’s cut through the industry gossip and answer the question straight: yes, coiled pipes absolutely can be used for oil and gas pipelines—they just aren’t one-size-fits-all, and knowing when to use them is the difference between a win and a costly mistake. Coiled Pipe

I first saw this for myself back in 2011, when a Permian Basin operator hit a snag on a new gathering line for a horizontal oil well. Their original plan called for 8 miles of 6-inch rigid steel pipe, which required six months of permitting, 120 separate truckloads to haul to the pad, and three separate weld teams working around the clock to connect the sections in 5-foot increments. Then a local storm dumped 14 inches of rain in 48 hours, turning the dirt access road to mud so deep that even the heavy flatbeds couldn’t get through. Rigid pipe sections were stuck 12 miles away in Midland, and the well was already sitting idle—losing $12,000 a day in deferred production. The operator reached out to me because they’d heard we had a small spool of 6-inch coiled line, designed for well work but never used for a full gathering run. We laid the pipe directly on the improved road shoulder, pulled it into place with a single directional boring unit that took less than three days, welded the two end connections, and had the well back online in seven days total. That was the moment I stopped seeing coiled pipe as a “band-aid” and started seeing it as a core pipeline solution.

Let’s start with the science, because this isn’t just anecdotal—there are real engineering reasons coiled pipes work for oil and gas applications. Coiled pipe is typically manufactured from high-grade carbon steel, alloy steel, or even corrosion-resistant alloys (CRAs) that meet or exceed API specifications (API 5L, API 5LC, to be exact—those are the standards the entire industry uses for pipeline materials). The key difference from rigid pipe is its forming process: instead of being bent and welded into straight sections and then transported separately, it’s formed into a continuous, tightly wound spool at the mill. Most of our standard spools come in 5,000-foot or 10,000-foot lengths, though we can custom-produce them up to 20,000 feet for smaller diameters. That continuity is a big deal for pipelines, because every weld is a potential failure point. API data shows that 70% of pipeline leaks and failures in gathering lines and low-pressure transmission lines are traceable to weld defects, corrosion at weld joints, or improper installation connections. With coiled pipe, you only have two end welds for a full 10,000-foot run, compared to 2,640 welds for the same length of 6-inch rigid pipe (since rigid pipe is manufactured in 20-foot sections for transport). That cuts down on failure risks dramatically.

But coiled pipe isn’t just about fewer welds—its physical properties make it well-suited for the unique demands of oil and gas applications. First, flexibility. A 6-inch rigid pipe has a minimum bend radius of around 30 feet, meaning you can’t curve it around a well pad, around existing infrastructure, or even uneven terrain without expensive bending equipment and the risk of cracking. A 6-inch coiled pipe has a minimum bend radius of 3 feet, so it can snake around tree lines, around existing well casings, and through small directional bores without extra site preparation. That flexibility also helps with thermal expansion and contraction—oil and gas pipelines often swing between -20°F in the winter in the Northern Rockies and 120°F in the summer, causing rigid pipe to expand and contract by several feet over a long run. Coiled pipe’s ability to flex with those temperature changes reduces the need for expansion loops, anchors, and bends that add time and cost to rigid pipe projects. For example, a 12-mile rigid transmission line in the Bakken would need 15 expansion loops, each costing around $15,000 to install; a coiled line of the same length doesn’t need a single one, saving $225,000 just in that part of the job.

Wait, but let’s be honest—no solution is perfect, and coiled pipe has limits. The biggest one is pressure rating. For small diameters (2-inch to 8-inch), coiled pipe can handle pressures up to 1,500 psi, which is perfect for gathering lines, flow lines from well pads to central processing facilities, and low-pressure transmission lines. But for high-pressure transmission lines (those carrying oil and gas hundreds of miles at pressures above 2,000 psi), coiled pipe isn’t a fit yet. The steel grades used for coiled pipe can’t match the same high-pressure performance as heavy-wall rigid pipe for long-distance, high-pressure runs, and the spooling process can introduce tiny residual stresses that become a risk at extreme pressures. Also, coiled pipe is harder to inspect for internal corrosion, especially in remote areas. Rigid pipe can be inspected with smart pigs that travel through the line, but coiled line’s tight radius makes pigging almost impossible, so operators have to use external corrosion monitoring techniques like ultrasonic testing or fiber-optic sensors, which add to long-term maintenance costs. That’s why we always tell clients to match coiled pipe to the right application, not force it into every project.

So where is coiled pipe actually used successfully in oil and gas, beyond my 2011 Permian story? Let’s break down the use cases that the industry has standardized on over the last 15 years. First, flow lines and well gathering lines. That’s the bread and butter for our company—90% of the coiled pipe we supply goes to well operators for connecting individual well pads to central battery facilities, usually 1 to 15 miles long. The flexibility cuts installation time by 50% or more compared to rigid pipe, and the fewer welds mean lower long-term failure rates. A 2022 study by the Pipeline and Hazardous Materials Safety Administration (PHMSA) found that coiled flow lines in the Permian had a leak rate of 0.12 leaks per 1000 miles, compared to 0.38 leaks per 1000 miles for rigid flow lines—way better safety numbers. Second, temporary and modular pipelines. Operators use coiled pipe for temporary lines during well workovers, frac jobs, or pipeline maintenance, because it can be spooled on and off trucks in hours, no heavy equipment needed. We’ve even had clients use it for permanent small pipelines in remote locations, like the shale plays in Wyoming where roads are only passable for a few months a year—hauling rigid pipe in would take weeks, while coiled spools fit on standard flatbeds and can be installed in days. Third, inshore and nearshore pipelines, like the small lines that connect offshore well platforms to onshore processing facilities. The flexibility makes it easy to lay around underwater rocks and existing pipelines, and it’s less prone to shifting from tides than rigid pipe.

Now, I know what a lot of pipeline engineers will push back on: “What about the life span? Rigid pipe lasts 50 years, coiled pipe is too thin.” That’s a fair question, and it’s why our coiled pipe options aren’t just standard carbon steel. We offer CRA cladded coiled pipe, where a thin layer of stainless steel or alloy is bonded to the carbon steel core, for applications with high-sulfur crude or brine that causes corrosion. We also offer epoxy-coated internal and external coiled pipe, which doubles the corrosion resistance of standard carbon steel. A 2019 field study of coiled flow lines in the Marcellus Shale, conducted by the Gas Technology Institute, found that CRA-cladded coiled lines had a corrosion rate of less than 0.01 mm per year, meaning they could last 40 years or more—on par with rigid line. For operators worried about life span, that’s a solid number.

Another common misconception is cost. People assume coiled pipe is more expensive per foot than rigid pipe, but that’s only if you look at upfront material costs. When you factor in installation time, labor, permitting, and maintenance, coiled pipe is almost always cheaper. Let’s do a quick example: a 10-mile, 6-inch line. Upfront material cost for rigid pipe is around $22 per foot, so $116,160 total for 10 miles. Installation cost for rigid pipe, including hauling, welding, inspection, and site prep, is around $35 per foot, so $184,800 total. That’s $300,960 total upfront. For coiled pipe, upfront material is around $28 per foot, so $147,840 total. But installation cost is only $15 per foot, because you don’t need to haul thousands of pipe sections, weld hundreds of joints, or do extensive site grading—so $79,200 total. That’s a total of $227,040, $73,920 cheaper than rigid pipe for the same 10-mile line. And that’s before you add in the cost of deferred production, which my Permian client dealt with—when their rigid pipe got stuck, they lost $84,000 in just seven days. Coiled pipe eliminates that risk, because it can be installed in weeks instead of months.

Over my 12 years as a coiled pipe supplier, I’ve seen a lot of operators jump on new technology without doing their homework, and I’ve seen a lot of engineers dismiss coiled pipe because that’s what they learned in college. But the data doesn’t lie. Coiled pipe isn’t a replacement for all oil and gas pipelines—long-distance high-pressure transmission lines will always be rigid pipe’s lane. But for the applications that make up the majority of pipelines in North America and many other regions: gathering lines, flow lines, temporary pipelines, remote well connections, and small modular runs, coiled pipe is a reliable, cost-effective, low-failure alternative that’s only getting better. We’re constantly working on new grades of steel that can handle higher pressures, and new coating technologies that make inspection easier, so that gap is narrowing all the time.

If you’re an operator, pipeline engineer, or project manager looking to evaluate whether coiled pipe makes sense for your next oil and gas pipeline project, I’d encourage you to start small. Test a short run—5 or 10 miles—in a low-stakes application, compare the installation time, cost, and future maintenance needs to what you’d get with rigid pipe. I’ve worked with clients who were skeptical at first, after a single trial run they switched their entire fleet of flow lines to coiled pipe. For example, a Denver-based independent operator we started working with in 2020 now uses coiled pipe for 90% of their new well connections in the DJ Basin, cutting their project timelines by 55% and their pipeline failure incidents by 68% over three years. That’s the kind of result that turns doubters into repeat customers.

At the end of the day, the oil and gas industry has changed a lot over the last decade. We’re all under pressure to lower costs, improve safety, and reduce downtime, and rigid pipe isn’t the only tool in the toolbox anymore. Coiled pipe has proven itself in thousands of projects across the globe, and while it’s not the answer for every pipeline question, it’s absolutely a valid, high-performance option for many of them.

If you’re ready to discuss whether coiled pipe can work for your oil and gas pipeline project, I’m here to help. We can walk through application specifics, provide custom quotes, and share case studies from projects similar to yours. Get in touch with our team to start a conversation that will help you avoid delays, cut costs, and build safer, more reliable pipelines.

High Frequency Electric Resistance Welded Spiral Fin Tube References

  1. Pipeline and Hazardous Materials Safety Administration (PHMSA). (2022). Coiled Pipe Performance in Oil and Gas Gathering and Flow Lines. U.S. Department of Transportation.
  2. Gas Technology Institute (GTI). (2019). Long-Term Corrosion Study of Coiled and Rigid Flow Lines in Marcellus Shale. GTI Research Report 19-047.
  3. American Petroleum Institute (API). (2021). Specification for Line Pipe (API 5L, 46th Edition). API Publishing Services.
  4. North Shale Operators Association (NSOA). (2021). Cost-Benefit Analysis of Coiled vs. Rigid Pipeline for Well Connections. NSOA Industry Brief.

Lifeng Industry Group Co., Limited
As one of the most professional coiled pipe manufacturers and suppliers in China, we’re featured by quality products and low price. Please feel free to wholesale high-grade coiled pipe in stock here from our factory. Contact us for more details.
Address: 406 Guotai Oriental Plaza, No.9 Renmin East Road, Zhangjiagang City, Jiangsu Province, China
E-mail: michael@lifengroup.com
WebSite: https://www.lifengtube.com/