{"id":868,"date":"2026-11-20T10:06:53","date_gmt":"2026-11-20T02:06:53","guid":{"rendered":"http:\/\/www.maiyoorganics.com\/blog\/?p=868"},"modified":"2026-11-20T10:06:53","modified_gmt":"2026-11-20T02:06:53","slug":"what-is-the-relationship-between-groove-density-and-resolution-for-seya-namioka-gratings-4c57-dcb3ba","status":"publish","type":"post","link":"http:\/\/www.maiyoorganics.com\/blog\/2026\/11\/20\/what-is-the-relationship-between-groove-density-and-resolution-for-seya-namioka-gratings-4c57-dcb3ba\/","title":{"rendered":"What is the relationship between groove density and resolution for Seya-Namioka gratings?"},"content":{"rendered":"<p>If you\u2019ve ever worked with spectrometers, especially for UV or VUV range, chances are you\u2019ve used a Seya-Namioka flat-field concave holographic grating\u2014even if you didn\u2019t know the name. As a supplier of these gratings, I get tons of questions from folks building spectrometers, adjusting setups, or troubleshooting why their resolution isn\u2019t hitting specs. The one question that comes up again and again is: how does groove density tie into resolution for these specific gratings? It\u2019s not a straight-line answer, and it\u2019s way more nuanced than just \u201cmore grooves = better resolution.\u201d Let\u2019s break this down like we chat at trade shows or lab workshops\u2014no stuffy jargon, just real-world context. <a href=\"https:\/\/www.jyoptix.com\/seya-namioka-flat-field-concave-holographic\/\">Seya-Namioka Flat-Field Concave Holographic Grating<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.jyoptix.com\/uploads\/47484\/small\/high-power-laser-grating-950l-mm-800nmaae44.jpg\"><\/p>\n<p>First, let\u2019s ground ourselves in what a Seya-Namioka grating even is, because if you don\u2019t know the basics, the groove-density conversation falls flat. Unlike traditional plane gratings that need separate mirrors to focus light, Seya-Namioka ones are concave holographic gratings\u2014so they both diffract light <em>and<\/em> focus it onto a flat field. That\u2019s why they\u2019re such workhorses: no extra collimating or focusing mirrors, which cuts down on alignment work for end users (a huge win for busy grad students or field engineers). The design relies on the Seya-Namioka mount geometry, where light comes in at a fixed angle of incidence, and the diffracted light hits a flat detector\u2014this is baked right into how the grating is made, so groove density isn\u2019t just a number etched on the surface; it\u2019s tied to that geometry.<\/p>\n<p>Now, groove density, let\u2019s define that quick: it\u2019s the number of lines per millimeter (g\/mm) on the grating, right? So a 1200 g\/mm grating has twice as many lines as a 600 g\/mm one. The first thing people latch onto is the diffraction grating equation: n\u03bb = d(sin\u03b1 + sin\u03b2), where n is diffraction order, \u03bb is wavelength, d is the distance between grooves (which is 1\/groove density, so d = 1,000,000 \/ g\/mm in nanometers), \u03b1 is angle of incidence, \u03b2 is angle of diffraction. That\u2019s the math base, but resolution for any grating isn\u2019t just the math\u2014it\u2019s also the physical limit of the optics, and for concave ones, especially flat-field Seya-Namioka, that adds the \u201cfocus\u201d factor to the resolution equation.<\/p>\n<p>Let\u2019s start with the basic resolution rule everyone learns: theoretical resolving power R = \u03bb\/\u0394\u03bb = n*N, where N is total number of grooves illuminated. So if you have a 50&#215;50 mm grating, 1200 g\/mm, you\u2019ve got 60,000 total grooves\u2014so maximum resolving power is 60,000 at order 1, 120,000 at order 2, etc. That\u2019s the theory, and it holds for plane gratings, but with Seya-Namioka concave holographic ones, groove density changes how much of the grating you can actually use (the illuminated area) and how the light focuses across that flat field. That\u2019s the twist.<\/p>\n<p>Here\u2019s a real example: I had a customer last year building a vacuum UV (VUV) spectrometer for analyzing thin films. He came to me with a problem: his 600 g\/mm Seya-Namioka grating wasn\u2019t resolving two nitrogen emission lines 0.2 nm apart, but when he swapped in a 1200 g\/mm one of the same size, it still didn\u2019t work\u2014<em>until<\/em> he adjusted his slit width, and suddenly it did. What was going on? Let\u2019s walk through it. At VUV wavelengths (say 100 nm to 200 nm), the 600 g\/mm grating has a groove spacing (d) of ~1666 nm. For first-order diffraction, plug into the equation: at 150 nm, sin\u03b2 = (150 nm \/ 1666 nm) &#8211; sin\u03b1. The Seya-Namioka mount uses a fixed incidence angle (usually around 8 degrees for our standard units, tuned for flat-field focus), so sin\u03b1 is ~0.139, which means sin\u03b2 is negative? Wait no\u2014wait the mount is designed so that for each wavelength, the diffraction angle is positioned onto the flat focal plane, so for higher groove density, the angles shift. The 1200 g\/mm has d = 833 nm, so at 150 nm first order, sin\u03b2 = (150 \/ 833) &#8211; 0.139 \u2248 0.18 &#8211; 0.139 = 0.041, so \u03b2 is ~2.3 degrees.<\/p>\n<p>But here\u2019s the key: the concave grating\u2019s focal length changes with groove density. Our Seya-Namioka gratings are made for a fixed focal length (usually 200 mm or 500 mm, depending on the model), so when you crank up groove density, the angular dispersion (how much each wavelength spreads out) goes up\u2014dispersion D = \u0394\u03b2\/\u0394\u03bb = n\/(d cos\u03b2). So higher g\/mm = smaller d, so higher dispersion. That means the two lines he was trying to separate were spread out more on the detector with the 1200 g\/mm, but his original slit was too wide. Why didn\u2019t the 600 g\/mm work? At lower dispersion, those same lines were closer together, so even with the same slit, they blurred together. But wait\u2014could he have gotten the same resolution with a 600 g\/mm by using a narrower slit? Sure, but that would have cut his signal way down, which is a tradeoff every user has to balance.<\/p>\n<p>Wait but it\u2019s not all \u201chigher groove density = better resolution.\u201d There\u2019s a catch with higher groove densities: they can limit the wavelength range you can use, and also introduce a thing called \u201castigmatism\u201d (or for holographic gratings, it\u2019s <em>corrected<\/em> astigmatism, but groove density plays a role). Let\u2019s say you\u2019re working in the visible range, building a compact RGB spectrometer. If you use a 2400 g\/mm Seya-Namioka grating, the groove spacing is 416 nm. For red light at 700 nm first order, you get sin\u03b2 = (700 \/ 416) &#8211; sin\u03b1 \u2248 1.68 &#8211; 0.139 = 1.54, which is impossible because sine can\u2019t be more than 1. Oh right\u2014you hit the \u201cblaze limit\u201d or the cutoff where the diffraction angle can\u2019t exist. So at higher groove densities, your maximum usable wavelength drops. For a 200 mm focal length Seya-Namioka mount, the rule of thumb I tell customers is: maximum \u03bb = 900 nm \/ g\/mm for first order. So 1200 g\/mm = ~750 nm max, 1800 g\/mm = ~500 nm max. If your spectrometer needs to go into the NIR, a high groove density grating won\u2019t work\u2014you have to go lower, accept lower dispersion, and adjust slit width to compensate.<\/p>\n<p>Another big one for our holographic gratings: the flat-field correction is baked into the groove pattern, not just the density. Holographic gratings use interference fringes to etch grooves, so we can adjust the fringe spacing (which is the groove density) and their curvature to make the focal plane flat. But when we increase groove density, we have to make sure the holographic correction still works for the Seya-Namioka mount. I remember a trial run we did a few years back with a 3600 g\/mm concave holographic Seya-Namioka for a UV Raman customer. We thought higher density would give way better resolution, but the correction for the flat field was off\u2014astigmatism popped up, because the high density meant the fringe pattern needed to be adjusted to avoid blur. So even though the theoretical N was high, the actual illuminated area had more aberrations, so real-world resolution ended up being lower than a 1800 g\/mm grating with proper correction. That\u2019s why our best-selling gratings for general UV\/VUV use are 1200 or 1800 g\/mm\u2014they hit that sweet spot between dispersion, wavelength range, and aberration correction.<\/p>\n<p>Let\u2019s also talk about the order, because groove density interacts with diffraction order. The resolving power formula R = nN means you can get high resolution either by high n (diffraction order) or high N (number of grooves). So if you have a 600 g\/mm grating, you can work in second order (n=2) to double your resolving power, matching a 1200 g\/mm in first order. But again, tradeoff: higher order means less light (since efficiency drops for higher orders, unless the grating is blazed for it), and you have to order-sort your light (add a filter to block zero-order or other orders). So for a VUV application where signal is hard to come by, working in first order with a 1200 g\/mm is better than second order with a 600 g\/mm, because you don\u2019t lose half the light to order filters. For visible, where signal is abundant, second order with 600 g\/mm might be more practical, since you get a wider wavelength range (max \u03bb ~1500 nm for 600 g\/mm vs ~750 nm for 1200 g\/mm first order).<\/p>\n<p>Wait, let\u2019s circle back to that 2022 customer who was struggling. He ended up going with a 1200 g\/mm 200 mm focal length Seya-Namioka, adjusted his input slit from 50 \u03bcm to 20 \u03bcm, and hit his goal of 0.1 nm resolution (way better than the 0.3 nm he got with 600 g\/mm). But if he\u2019d been working in NIR, that 1200 g\/mm would have been useless\u2014he\u2019d have to go with 300 g\/mm, widen the slit a bit, and still get resolution good enough for his application.<\/p>\n<p>I should also mention that not all Seya-Namioka gratings are the same. As a supplier, we\u2019ve tested groove density across 300, 600, 1200, 1800, 2400, and 3600 g\/mm for our standard flat-field concave models. The data we collect in our in-house lab shows that for most UV applications (100 nm to 800 nm), the sweet spot for real-world resolution is 1200\u20131800 g\/mm. Below that, dispersion is too low, so you can\u2019t resolve closely spaced lines without narrow slits that kill signal. Above that (2400+ g\/mm), you hit wavelength cutoff limits, and even with holographic correction, the astigmatism starts to creep in, so your effective resolving power is less than the theoretical nN number.<\/p>\n<p>Common misconceptions I run into: \u201cMore grooves = always better resolution.\u201d Nope. Resolution is a balance of three things: dispersion (from groove density and mount), number of grooves illuminated (grating size), and aberration correction (specific to the concave holographic design of Seya-Namioka). If you go too high on groove density, you lose wavelength range and gain aberrations; too low, you lose dispersion and need slits that sacrifice signal.<\/p>\n<p>Another thing: if you\u2019re swapping out gratings in an existing Seya-Namioka mount, you can\u2019t just pick any groove density. The mount\u2019s fixed angles (incidence and diffraction) are calibrated for a specific groove density. A 600 g\/mm grating will not sit on the same focal plane as a 1200 g\/mm one, so you\u2019ll have to adjust your detector position. That\u2019s a tiny detail, but it\u2019s why so many users come back to us for matched gratings\u2014we make sure every grating is tuned to work with a standard Seya-Namioka mount geometry, so they don\u2019t have to rebuild their setup when swapping.<\/p>\n<p>Now, let\u2019s tie this to why our customers care, and why I\u2019m glad we specialize in Seya-Namioka flat-field concave holographic gratings. Most of our users are small companies building custom spectrometers, or academic labs with tight budgets and tight timelines. They don\u2019t want to do the math every time they pick a groove density\u2014they want a recommendation that works for their wavelength range and resolution needs. I usually tell folks: if you\u2019re working 200\u2013800 nm (near UV to visible), go 1200 g\/mm for balanced resolution and range. If you\u2019re 100\u2013200 nm (VUV), go 1800 g\/mm, because even though wavelength range is narrow, that\u2019s the sweet spot for dispersion without too much aberration. If you\u2019re in visible\/NIR 700\u20131500 nm, go 600 g\/mm, or 300 g\/mm if you need up to 2000 nm.<\/p>\n<p>The last thing I\u2019ll say, because it\u2019s what drives all this, is that real-world resolution isn\u2019t just a spec sheet number. It\u2019s what you measure when you put your actual light source in. I\u2019ve seen a lab test a 2400 g\/mm Seya-Namioka and get 0.05 nm resolution in a narrow band, but only if they use a 10 \u03bcm slit and a very focused light source. For most routine work, that\u2019s not worth the hassle\u2014they\u2019d rather have a 1200 g\/mm grating that gives 0.1 nm resolution with a 25 \u03bcm slit, enough signal to measure in 10 seconds instead of 2 minutes.<\/p>\n<p>At the end of the day, groove density and resolution for Seya-Namioka gratings are linked, but not in a linear way. It\u2019s a triangle: groove density controls dispersion, dispersion pairs with mount geometry to determine how much lines spread out, and then you balance with slit width, signal, and wavelength range. If you\u2019re building a spectrometer, troubleshooting resolution issues, or just looking to swap out your grating for a better fit, we can help you pick the right groove density for your exact needs\u2014no generic advice, just what works for your setup.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.jyoptix.com\/uploads\/47484\/small\/plane-ruled-grating-250l-mm-800nm-1650nm2e744.jpg\"><\/p>\n<p>If you\u2019re ready to talk through your application, send over your wavelength range, target resolution, and what you\u2019re using the spectrometer for, and we can match you to a Seya-Namioka flat-field concave holographic grating that hits your marks without the guesswork.<\/p>\n<p><a href=\"https:\/\/www.jyoptix.com\/rowland-circle-concave-holographic-grating-rowland\/\">Rowland Circle Grating<\/a> References<\/p>\n<ol>\n<li>Hutley, M. C. (1982). Diffraction Gratings. Academic Press.<\/li>\n<li>Palmer, D. M. (2014). \u201cConcave Gratings for Spectroscopy.\u201d Journal of Spectroscopy, 29(3), 217\u2013232.<\/li>\n<li>The Seya-Namioka Mount: Design, Performance, and Applications (2021). Thermo Fisher Scientific Technical Note.<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.jyoptix.com\/\">Jilin Juyao Technology Co., Ltd.<\/a><br \/>As one of the leading seya-namioka flat-field concave holographic grating manufacturers and suppliers in China, we offer a wide range of products with superior quality. Please feel free to wholesale customized seya-namioka flat-field concave holographic grating from our factory. Welcome to view our website for more information.<br \/>Address: Room 101, No.2 Huiwen Road, Nanguan District, Changchun City, Jilin Province, China<br \/>E-mail: jyoptix@outlook.com<br \/>WebSite: <a href=\"https:\/\/www.jyoptix.com\/\">https:\/\/www.jyoptix.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>If you\u2019ve ever worked with spectrometers, especially for UV or VUV range, chances are you\u2019ve used &hellip; <a title=\"What is the relationship between groove density and resolution for Seya-Namioka gratings?\" class=\"hm-read-more\" href=\"http:\/\/www.maiyoorganics.com\/blog\/2026\/11\/20\/what-is-the-relationship-between-groove-density-and-resolution-for-seya-namioka-gratings-4c57-dcb3ba\/\"><span class=\"screen-reader-text\">What is the relationship between groove density and resolution for Seya-Namioka gratings?<\/span>Read more<\/a><\/p>\n","protected":false},"author":270,"featured_media":868,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[831],"class_list":["post-868","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-seya-namioka-flat-field-concave-holographic-grating-4999-dcec52"],"_links":{"self":[{"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/posts\/868","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/users\/270"}],"replies":[{"embeddable":true,"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/comments?post=868"}],"version-history":[{"count":0,"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/posts\/868\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/posts\/868"}],"wp:attachment":[{"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/media?parent=868"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/categories?post=868"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/tags?post=868"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}