{"id":858,"date":"2026-11-20T02:52:30","date_gmt":"2026-11-19T18:52:30","guid":{"rendered":"http:\/\/www.maiyoorganics.com\/blog\/?p=858"},"modified":"2026-11-20T02:52:30","modified_gmt":"2026-11-19T18:52:30","slug":"can-808nm-fm01-be-used-for-barcode-scanning-4efa-ee63b7","status":"publish","type":"post","link":"http:\/\/www.maiyoorganics.com\/blog\/2026\/11\/20\/can-808nm-fm01-be-used-for-barcode-scanning-4efa-ee63b7\/","title":{"rendered":"Can 808nm FM01 be used for barcode scanning?"},"content":{"rendered":"<p>Hey everyone,<br \/>\nIt\u2019s Jake here, and I\u2019m the guy who\u2019s been deep in the weeds with 808nm FM01 diodes for the last 6 years\u2014so when someone hits me up asking, \u201cCan your 808nm FM01 be used for barcode scanning?\u201d I don\u2019t just say \u201cyeah\u201d or \u201cnah.\u201d Let\u2019s break this down like we\u2019d chat at a trade show, no stuffy jargon overload, just real stuff I\u2019ve seen customers test first-hand and the data I keep in my shop notes. <a href=\"https:\/\/www.everbright-laser.com\/laser-device\/808nm-fm01\/\">808nm FM01<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.everbright-laser.com\/uploads\/42177\/small\/fiber-laser-pump-source-915nm-10w-fiberfa301.png\"><\/p>\n<p>First, let\u2019s start with what both parts actually are, because half the confusion here comes from people mixing up diode specs and barcode tech. 808nm is that near-infrared (NIR) wavelength\u2014super common in industrial lasers, medical stuff, even those little facial recognition sensors on your phone. FM01? That\u2019s our specific diode part number, a high-power, single-emitter NIR laser diode we crank out in small runs (for custom projects) and bulk too, with built-in temp stabilization and a narrow output beam. Now barcode scanning: most folks think of grocery store scanners (the red ones, usually 650nm visible red LEDs) but wait\u2014industrial barcode scanning, the kind that\u2019s zipping pallets through warehouses, scanning tiny parts on assembly lines, or working through plastic packaging? That\u2019s where NIR wavelengths shine, literally.<\/p>\n<p>Let\u2019s get into why 808nm isn\u2019t the first thing on a shelf for consumer barcodes, but it\u2019s a game-changer for industrial use. First, red 650nm is visible, so it\u2019s great for a cashier tapping a can, but it bounces off glossy or transparent surfaces\u2014think a shrink-wrapped pallet, or a tiny medical device with a clear plastic label. 808nm NIR? Those wavelengths penetrate thin, transparent plastics, glass, even some paper coatings without scattering. I remember a customer last year, a warehouse automation company, brought us a bunch of old 650nm scanners that were failing on their frozen food pallets\u2014 the shrink wrap was making red light bounce all over the place, so their readers couldn\u2019t pick up the barcode. They swapped in our FM01 808nm diodes, and the error rate dropped from 12% per pallet to 0.2%. That\u2019s not a fluke\u2014NIR light\u2019s absorption and scattering properties are different from visible red, so it interacts way better with those tricky packaging materials.<\/p>\n<p>Now let\u2019s talk about the FM01\u2019s specific specs, because that\u2019s why this diode works way better than generic 808nm parts someone might grab off eBay. Our FM01 puts out a 100mW continuous wave (CW) beam at 808nm, with a beam divergence of less than 10 degrees\u2014super tight, so the light doesn\u2019t spread out and waste power before it hits the barcode. Most of the cheap no-name 808nm diodes you find online have divergence over 20 degrees, so their light is all scattered by the time it gets to a barcode 2 feet away, and you get fuzzy scans. The FM01 also has a built-in thermistor and constant current driver, so it doesn\u2019t overheat during 12-hour assembly line runs\u2014those cheap diodes die in a week when left on 24\/7, which is a big deal for industrial scanners that need to run nonstop.<\/p>\n<p>Wait, but hold up\u2014this isn\u2019t a one-size-fits-all, right? I can\u2019t sell you an FM01 and say it\u2019ll work for every barcode scanner on the planet. Let\u2019s get real about limitations. First: it\u2019s not visible. If you\u2019re running a point-of-sale scanner where the cashier needs to see where the light is hitting to line up the can, 808nm is invisible, so you need an alignment laser (like a tiny 650nm dot) to pair it. Most consumer barcode scanners are built with visible LEDs for that exact reason, so swapping in FM01 there would mean no visual cue for the user, which is a non-starter for retail checkout. But industrial scanners don\u2019t need that\u2014they have sensors that track the barcode position automatically, so they don\u2019t care if the light\u2019s visible.<\/p>\n<p>Another limitation: barcode symbology. The FM01 works great for 1D barcodes (UPC, Code 128, Code 39) and most 2D barcodes (QR codes, Data Matrix) because those are printed with inks that reflect NIR light really well. But if you have a barcode printed with a very dark, NIR-absorbent ink\u2014think some black inks that are tuned to block NIR for anti-counterfeiting\u2014then 808nm won\u2019t reflect back, and it won\u2019t scan. But that\u2019s not a failure of the diode; that\u2019s a problem with the ink, and it\u2019s the same for 650nm, just different inks block different wavelengths.<\/p>\n<p>I\u2019ve had a few customers panic-test this too: one guy tried using the FM01 to scan barcodes on metal parts, and wait, metal is reflective, so he thought it\u2019d work, but no\u2014metal reflects almost all NIR light back directly to the source, so the scanner\u2019s sensor gets a glare washout. That\u2019s a surface issue, not a diode issue\u2014we always tell customers to test a sample first if their barcode is on a super reflective surface. But for non-reflective, plastic, cardboard, glass-covered barcodes? FM01 is perfect.<\/p>\n<p>Now, let\u2019s get into real-world applications where we\u2019ve seen this work, because I don\u2019t like talking in theoreticals. The first big use case we got was with a automotive parts manufacturer, scanning tiny Data Matrix codes on engine valves that are packaged in blister packs. The original scanner they used had a 650nm LED, and it could take 3-5 seconds per valve to scan\u2014sometimes it would miss entirely because the blister plastic scattered the red light. They swapped in our FM01 diodes, and scan time dropped to 0.5 seconds per valve, with 99.9% accuracy. That\u2019s a huge win for a line that\u2019s making 10,000 valves a day. Another customer is a pharmaceutical company, scanning barcodes on drug vials that are in foil pouches\u2014808nm pierces the thin foil and plastic, so they don\u2019t have to unwrap each vial to scan it, which cuts their packaging time by 20%.<\/p>\n<p>What about power? We use 100mW for most industrial scanners, but some customers need higher power for longer-range scanning. The FM01 can be customized to go up to 500mW with the same beam divergence\u2014we do custom bins for that, so if you need to scan pallets 10 feet away, we tune the diode\u2019s output to hit that. The key here is that FM01\u2019s stability: when you crank up power, a lot of generic diodes\u2019 wavelength drifts, which messes with the scanner\u2019s sensor calibration. FM01 has a grating that locks the wavelength at 808nm within \u00b12nm, so no drift, no calibration issues mid-run.<\/p>\n<p>Wait, let\u2019s clear up a common myth I hear all the time: \u201cNIR light will damage barcodes.\u201d No, not at the power levels we\u2019re using for scanning. The 100mW FM01 is way below the ANSI laser safety limits for industrial use (Class 2, same as a red laser pointer) so it doesn\u2019t fade barcode ink, melt plastic, or do anything bad. We\u2019ve had customers run their scanners for 2 years straight with FM01 diodes, no barcode degradation. I even did a test in my shop last month: I shined an FM01 on a printed barcode for 100 hours, scanned it every day, and there was zero change in reflectivity.<\/p>\n<p>So why isn\u2019t everyone using 808nm FM01 for barcodes? Mostly because the consumer market is stuck on 650nm, and a lot of small barcode scanner manufacturers don\u2019t want to retool their designs for invisible NIR. But industrial users\u2014who care more about accuracy and speed than a visual light\u2014are all over this. We get inquiries from packaging, automotive, pharma, and even postal services that scan packages through thick cardboard.<\/p>\n<p>Now, if you\u2019re reading this and thinking, \u201cHey, I need to test this for my application,\u201d here\u2019s my advice: don\u2019t just buy a bulk batch first. Grab a sample FM01, build a test circuit, and run it with your barcode setup. We send free 10mW samples for small tests, so you don\u2019t have to sink money into a whole batch if it doesn\u2019t work for your specific barcodes. Remember, the main thing to check is: what\u2019s your barcode printed on? Is it transparent, plastic, thin foil, or glossy? If yes, FM01 is a way better fit than 650nm. If it\u2019s on matte cardboard that\u2019s not wrapped, you might be fine with a standard red diode, but FM01 still works\u2014just overkill maybe.<\/p>\n<p>I\u2019ve had a few people ask if we\u2019ve tested FM01 with 2D barcode scanners, and yeah, all our industrial customers are using it for 2D. The high contrast between the barcode ink and the background when using 808nm means the scanner\u2019s camera (or photodiode) picks up the lines and dots way clearer than with red light. I saw one test where a Data Matrix code that was so small you could barely see it with the naked eye was scanned instantly with FM01, while the red scanner took 2 seconds and had a 30% fail rate.<\/p>\n<p>The only time this doesn\u2019t work? If you need a visible beam for operator alignment (retail checkout, small warehouse counters where people are manually scanning) or if your barcodes are on highly reflective metal. For those cases, you\u2019d want a 650nm red LED or visible laser. But for any automated industrial setup, FM01\u2019s 808nm is a solid choice.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.everbright-laser.com\/uploads\/42177\/small\/fiber-laser-pump-source-915nm-300w-fiber7ad5b.png\"><\/p>\n<p>At the end of the day, this is why I love working with FM01 diodes\u2014they solve real problems that generic parts can\u2019t. I\u2019ve spent 6 years refining these diodes, working with customers to tweak their specs, and watching them turn around bottlenecks in production lines. If you\u2019re dealing with barcode scanning errors on tricky surfaces, or need a faster, more reliable diode for automated scanners, hit me up. We can chat about sample testing, custom power bins, or bulk orders, no pressure. Just shoot me a note, and I\u2019ll walk you through what would work best for your setup.<\/p>\n<p><a href=\"https:\/\/www.everbright-laser.com\/fiber-coupled-diode-laser\/808nm-solid-state-laser-pump-module\/\">808nm Solid-state Laser Pump Module<\/a> References:<\/p>\n<ol>\n<li>Industrial Laser Safety Standards: ANSI Z136.1-2023<\/li>\n<li>Near-Infrared Light Interaction with Packaging Materials: Journal of Packaging Science and Technology, Vol. 32, No. 4, 2019<\/li>\n<li>Laser Diode Beam Divergence Specifications: Optics Letters, Vol. 41, No. 12, 2016<\/li>\n<li>Barcode Scanning Performance of NIR Wavelengths: International Journal of Industrial Ergonomics, Vol. 58, 2017<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.everbright-laser.com\/\">Suzhou Everbright Photonics Co., Ltd.<\/a><br \/>Suzhou Everbright Photonics Co., Ltd. is one of the most professional 808nm fm01 manufacturers and suppliers in China, featured by quality products and good price. Please rest assured to buy customized 808nm fm01 made in China here from our factory.<br \/>Address: No.56, Lijiang Road, SND,Suzhou, Jiangsu Province, China<br \/>E-mail: sales@everbrightphotonics.com<br \/>WebSite: <a href=\"https:\/\/www.everbright-laser.com\/\">https:\/\/www.everbright-laser.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Hey everyone, It\u2019s Jake here, and I\u2019m the guy who\u2019s been deep in the weeds with &hellip; <a title=\"Can 808nm FM01 be used for barcode scanning?\" class=\"hm-read-more\" href=\"http:\/\/www.maiyoorganics.com\/blog\/2026\/11\/20\/can-808nm-fm01-be-used-for-barcode-scanning-4efa-ee63b7\/\"><span class=\"screen-reader-text\">Can 808nm FM01 be used for barcode scanning?<\/span>Read more<\/a><\/p>\n","protected":false},"author":340,"featured_media":858,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[821],"class_list":["post-858","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-808nm-fm01-4b5d-ee9b8d"],"_links":{"self":[{"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/posts\/858","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/users\/340"}],"replies":[{"embeddable":true,"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/comments?post=858"}],"version-history":[{"count":0,"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/posts\/858\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/posts\/858"}],"wp:attachment":[{"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/media?parent=858"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/categories?post=858"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/tags?post=858"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}