{"id":531,"date":"2026-10-08T16:00:59","date_gmt":"2026-10-08T08:00:59","guid":{"rendered":"http:\/\/www.maiyoorganics.com\/blog\/?p=531"},"modified":"2026-10-08T16:00:59","modified_gmt":"2026-10-08T08:00:59","slug":"how-do-i-store-my-riveted-inline-skates-properly-4d3d-b0f375","status":"publish","type":"post","link":"http:\/\/www.maiyoorganics.com\/blog\/2026\/10\/08\/how-do-i-store-my-riveted-inline-skates-properly-4d3d-b0f375\/","title":{"rendered":"How do I store my Riveted Inline Skates properly?"},"content":{"rendered":"

If you\u2019re a Riveted inline skates owner (or let\u2019s be real, if you just bought a pair from my supply line and want them to last longer than that random pair you thrifted in 2021), you\u2019ve probably asked this at some point: why does my skates feel crunchy after a month, or why did my wheels go flat when I pulled them out for a weekend grind sesh? I get it\u2014when you\u2019re pumped to hit the pavement, storage is the last thing on your mind\u2026 until it\u2019s the only thing stopping you from landing that new street trick. I\u2019ve been selling Riveted skates for 5 years now, and I\u2019ve seen every single storage mistake under the sun: people leaving them on a concrete porch all winter, cramming them in a garbage bag under a hot bed, even shoving them in a closet with their partner\u2019s 10 winter coats. Today, I\u2019m breaking down exactly how to store your Riveted inline skates properly, no fancy gear needed, just stuff you probably already have lying around. Riveted Inline Skates<\/a><\/p>\n

<\/p>\n

First, let\u2019s start with the basics that 90% of you skip: your skates have three main parts that hate being mistreated in storage\u2014 the boot, the bearings, and the wheels. Riveted skates are built pretty tough, but they\u2019re not invincible. The nylon boot can crack if it\u2019s left in extreme temperatures, the bearings seize up if they get damp and don\u2019t dry out, and the wheels? They flat-spot so fast if they\u2019re not supported right, it makes my eyes twitch when a customer sends me a pic of their brand new set with two flat spots. I\u2019m gonna make this super actionable, step by step, no jargon, I promise. No \u201cindustrial-grade polymer components\u201d or whatever\u2014just real talk from someone who works with these every single day.<\/p>\n

Let\u2019s open with post-sesh prep, because storage doesn\u2019t start when you kick off your skates\u2014it starts right after you finish skating. This is the part most people rush through, and it\u2019s the reason their skates die early. First thing: take off your wheels and bearings? Wait no, wait\u2014wait, if you just skated in the rain or through puddles, yes, you need to dry the inside first. If you did a park session on dry pavement, just wipe down the boot and wheels. Here\u2019s what I always tell new customers: grab an old microfiber towel (the ones you use for cleaning glasses work perfect, no lint) and wipe every inch of the boot. Don\u2019t just pat the inside\u2014if you have removable liners (all modern Riveted skates have these, right?), pull them out and lay them over a chair or a shower rod to air dry for at least 4 hours. I see so many people shoving the wet liner back in the boot \u201cto save time\u201d and then wonder why it smells like a gym sock after a week. And don\u2019t even get me started on what damp liners do to the boot\u2019s inner lining\u2014mold and mildew is a one-way ticket to having to buy a new liner mid-season. That\u2019s a $30 mistake I\u2019d rather save you from.<\/p>\n

Next, bearings. If you skated through any dampness at all, you need to give your bearings a quick wipe. Take a dry paper towel (not the fancy quilted kind, the thin ones work) and run it over the exposed part of each bearing. If you let water sit in the bearings over storage, they\u2019ll rust, and next time you spin them, it\u2019ll sound like a tiny lawnmower is attached to your skate. If you did a super muddy session, sure, you can take the bearings out and give them a quick rinse with isopropyl alcohol, but 99% of the time, a good wipe is enough. Don\u2019t overdo it\u2014too much alcohol will eat at the bearing\u2019s sealant, and that\u2019s just another unnecessary step.<\/p>\n

Now, the actual storage spot. This is where most people mess up. Let\u2019s get one rule straight: never store your Riveted inline skates anywhere extreme. What\u2019s extreme? Direct sunlight (like propped on a sidewalk next to a window all day), a hot garage where temps go over 100\u00b0F in summer, a basement that floods, a shed that gets freezing in winter. All of these will wreck your skates fast. Sunlight breaks down the boot\u2019s nylon\u2014over a few months, it\u2019ll get brittle and crack when you\u2019re lacing up. Hot spots make the wheels soft and warp them, so when you skate, they\u2019ll wobble like crazy. Freezing temps? The plastic and rubber parts get hard and crack, and the lubricant in the bearings turns to sludge. No thank you.<\/p>\n

The ideal storage spot is somewhere cool, dry, and consistent. Like a closet in your hallway, under your bed (but not crammed under there\u2014leave a little air gap), a shelf in your bedroom, or a dedicated skate rack. Wait, a skate rack is great, but if you don\u2019t have one, no big deal. Here\u2019s a pro tip from my warehouse: when you set them down, never set them on the wheels. Set them on the boot side, or lay them flat. Why? Because if you leave them standing on the wheels for months, gravity will flatten the spot on the wheel that\u2019s touching the ground. That\u2019s a flat spot, and it\u2019s not easy to fix. I\u2019ve had customers come to me with brand new skates that have flat spots because they propped them against a wall standing up for two months. Save yourself the $80 wheel set replacement and lay \u2018em flat or set \u2018em on the boot.<\/p>\n

Now, what about if you\u2019re storing them long-term? Like, if you\u2019re not gonna skate for 2+ months\u2014say, winter break, or a trip abroad. That\u2019s a different scenario. I get this a lot from customers in places with super cold winters who put their skates away for 3 or 4 months. What do you do then? First, clean everything thoroughly: take the liners out, wash them on a gentle cycle (cold water, no bleach, air dry only\u2014putting them in the dryer melts the foam), wipe the boot down with a mild soap and water mix, dry all bearings and wheels completely, even take the wheels off to make sure there\u2019s no dirt or moisture stuck between the bearing and the wheel hub. Then, when you put them away, deflate the wheels a little\u2014like, drop the PSI from your usual 85 to 70. Why? It takes pressure off the inner tube so it doesn\u2019t develop a flat spot over months. And store them in a breathable bag\u2014wait, not a airtight plastic bag, that\u2019s a mold magnet. A cotton mesh bag, or a canvas duffel bag with the top unzipped a little for air flow. And keep them in that cool, dry spot we talked about\u2014definitely not a freezing garage. For long-term, I also recommend putting a silica gel packet in the bag if you have one\u2014you know, the ones that come in shoe boxes or new electronics. They soak up any residual moisture, no extra work.<\/p>\n

Wait, one thing I see all the time: people storing their skates with their helmet and pads. That\u2019s fine, but make sure none of the gear is resting right on the wheels or boots, and again, make sure everything is dry. If your helmet is damp, it\u2019ll transfer moisture to your liners, which defeats the whole purpose. Another quick hack: if you have kids who skate and their skates are tiny, don\u2019t store them in a toy bin with other stuffed animals or toys. All that stuff traps moisture, and you\u2019ll be surprised how fast tiny skate liners get moldy in a bin.<\/p>\n

Now, let\u2019s talk about common myths I hear all the time, because I want to make sure you don\u2019t fall for these. Myth 1: \u201cI need to oil my bearings before storing them.\u201d No, unless you just cleaned them. If you\u2019re storing them after a dry session, don\u2019t add oil\u2014it\u2019ll just attract dirt and gunk over time, and next time you go to use them, your bearings will be crunchy. If you did a deep clean and took the bearings apart, then yes, add a tiny bit of bearing oil before storing, but that\u2019s only for when you\u2019ve taken them apart. Myth 2: \u201cStoring them upright is fine, I just prop them against the wall.\u201d No, that\u2019s how flat spots happen. Even if you only store them for a month, upright is worse than laying flat. Gravity is a powerful thing, and rubber wheels don\u2019t forget where they\u2019re pressed against a hard surface. Myth 3: \u201cIf I keep them in the original box, that\u2019s enough.\u201d Original boxes are great for shipping, but they\u2019re cardboard, they can get damp if your basement is humid, and they block air flow. Half the time, original boxes get thrown in the back of a closet and forgotten anyway\u2014you\u2019re better off with a breathable bag.<\/p>\n

Wait, what about if you live in a tiny apartment and have zero extra closet space? I get it, I\u2019ve lived in a studio too. The best spot there is the back of your closet, hanging up? No, don\u2019t hang the boots by the laces, that can stretch the eyelets and the laces over time. Lay them flat on top of your sweaters, that works fine. Just make sure they\u2019re not under a pile of heavy coats that will squish the boots and warp the frame. The frame on Riveted skates is aluminum, right? It\u2019s pretty sturdy, but if you have 50 lbs of clothes on top, it can bend a little, and that\u2019ll throw off your alignment when you skate.<\/p>\n

Another thing: if you ever notice your skates have a weird smell after storage, don\u2019t just keep using them. Take the liners out, wash them, wipe the boot with a mild disinfectant spray, and leave them in a sunny spot (but not too long, like a few hours, not a whole day) to air out. Sunlight kills bacteria, so a few hours on a nice day will get rid of that gym sock smell way better than anything else.<\/p>\n

Now, let\u2019s wrap this up with a quick checklist, because I know you\u2019re busy and don\u2019t want to reread this whole post every time. Here\u2019s your 5-step quick storage routine for after every sesh:<\/p>\n

    \n
  1. Pull out liners, dry them for at least 4 hours (or overnight if damp)<\/li>\n
  2. Wipe down boot, wheels, and exposed bearings with a dry microfiber towel<\/li>\n
  3. Remove any small dirt or debris stuck in the wheels or frame with a soft brush (an old toothbrush works great)<\/li>\n
  4. Lay skates flat or set them on the boot (never on the wheels) in a cool, dry spot<\/li>\n
  5. If storing for more than 2 months, add silica gel, deflate wheels slightly, and use a breathable bag<\/li>\n<\/ol>\n

    And for long-term (3+ months) storage:<\/p>\n

      \n
    1. Deep clean liners, wash on gentle cycle, air dry completely<\/li>\n
    2. Take wheels and bearings off, clean all parts, dry thoroughly<\/li>\n
    3. Deflate wheels to 70 PSI, put all parts back on (loosen the axle a tiny bit so it\u2019s not super tight)<\/li>\n
    4. Store in a breathable canvas\/mesh bag with a silica gel packet<\/li>\n
    5. Keep in a consistent temp spot (60-75\u00b0F is ideal, avoid extremes)<\/li>\n<\/ol>\n

      Look, I sell Riveted inline skates because I believe in them\u2014they\u2019re built for people who actually skate, not just store skates on a shelf as decor. But even the best skates will die early if you treat \u2018em wrong in storage. I\u2019ve seen customers come to me with skates that are 3 years old and still look brand new, all because they followed these simple steps, and I\u2019ve seen others come in with skates that are 6 months old and need a full replacement because they left \u2018em on a porch all winter. It\u2019s all about the little stuff.<\/p>\n

      <\/p>\n

      If you\u2019re looking to stock up on extra Riveted skates for your crew, or just need replacement parts to keep your current pair going, I\u2019m here to help. We carry the full line of Riveted inline skates, liners, wheels, bearings, everything you need to keep skating all year round. Hit us up to chat about pricing, bulk orders, or whatever you need\u2014no pressure, just skate folks helping other skate folks.<\/p>\n

      Ice Skates<\/a> References:<\/p>\n

        \n
      1. International Inline Skating Federation. (2022). Best Practices for Inline Skate Maintenance and Storage.<\/li>\n
      2. Outdoor Industry Association. (2021). Gear Storage Tips for Recreational Sport Equipment.<\/li>\n
      3. Riveted Skates Product Care Guide. (2023). Inline Skate Longevity Guide.<\/li>\n
      4. Rubber Association. (2020). Effects of Temperature and Gravity on Rubber Wheel Degradation.<\/li>\n
      5. Athletic Footwear Association. (2022. Liner Care and Mold Prevention for Performance Skates.<\/li>\n<\/ol>\n
        \n

        Yongkang Jinsibo Industry & Trade Co., Ltd.<\/a>
        We are one of the most professional riveted inline skates manufacturers and suppliers in China, also support customized service. With abundant experience, we warmly welcome you to wholesale bulk high quality riveted inline skates in stock here from our factory. Contact us for pricelist.
        Address: No.36, Lin’keng Chenlu Mountain Road, Gushan Town, Yongkang City
        E-mail: jinsibo2026@126.com
        WebSite:         https:\/\/www.cnjinsibo.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

        If you\u2019re a Riveted inline skates owner (or let\u2019s be real, if you just bought a … How do I store my Riveted Inline Skates properly?<\/span>Read more<\/a><\/p>\n","protected":false},"author":116,"featured_media":531,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[494],"class_list":["post-531","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-riveted-inline-skates-4b0b-b12caa"],"_links":{"self":[{"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/posts\/531","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/users\/116"}],"replies":[{"embeddable":true,"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/comments?post=531"}],"version-history":[{"count":0,"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/posts\/531\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/posts\/531"}],"wp:attachment":[{"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/media?parent=531"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/categories?post=531"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.maiyoorganics.com\/blog\/wp-json\/wp\/v2\/tags?post=531"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}